MECHANICAL STIRRER
April 22, 2020
WATER BATHS
April 22, 2020
HOMOGENIZER
Description
- Practical solution if mixing, emulsification, shredding or
chopping is required for small samples. - Easy to hold due to the light weight for one hand operation.
Can be used both hand-held or post mounted. - High torque motor with a variable speed adjustment enables
rapid and effective disruption of a wide range of samples. - Flexible configuration of different rotors and stators enables
the homogenisator adaptive to most applications. - Can rapidly homogenize samples inrange 0,1 ml to 50 ml
or 1 ml – 250 ml of liquid depending on the rotor/stator type. - During operation, the sample is drawn into the core of the
homogenizer. - The material is repeatedly cycled through narrow slits in the
probe where it is rapidly disintegrated by high shear. - Maximum speed of 30.000 rpm rate reduces processing
time significantly. - Complete homogenization of samples is usually achieved
in a few seconds. Reliable results are assured with extremely
high presicion. - Smooth motor drive makes working very safe and
comfortable. - Smooth acceleration also prevents unnecessary spills.
- An overload protection feature increases the life span of the motor.
- Shafts, rotors and stators are constructed of quality AISI
316 stainless steel which is inert to agressive solutions
Assembly and disassembly of rotors can be done without
requirement of special tools. - Shafts, rotors, stators are not supplied as a standard
accessory. These should be ordered separately. - Speed control at 6 stages as 8.000, 12.000, 15.000, 18.000,
22.000, 30.000 rpm.
Additional information
| option | Homogenizer, shaft for 0.1ml – 50 ml, shaft for 1 – 250 ml, bosshead clamp, stand |
|---|
